Category: Portfolio

Categories
Eddy Current Flaw Detector

WT-82 Eddy Current Flaw Detector

Main Technical Parameters

  1. Frequency range: 100Hz-2MHz set as need, suitable for any metallic material.
  2. Magnification: 0-70db, step for 0.1db.
  3. Phase: 0°- 360°, step for 1°
  4. Two independent optional frequency.
  5. Automatic phase, amplitude analysis.
  6. Automatic zero system: Zero intervals can be set.
  7. Three different style of alarm area, and can be applied to any modes.
  8. Cut start and end signal function.
  9. Auto-screen/tracking impedance showed, and can be set interval or cancel.
  10. Automatic delay alarm system, and delay time can be set.
  11. Automatic delay marking system, and delay time can be set.
  12. Replay testing signal and two-way access, can automatic save this in hard disk, and you can burn a disc for permanent preservation.
  13. Perfect documents process function, and customized production of standard parameters.
  14. Automatic high-speed analog/digital electronic equilibrium.
  15. Allocate every probe: Out-through probe, rotational-scan probe, etc.
  16. Suitable for online quality testing of metal pipe and bar manufacturers.

System applicable standards:

  • China: GB/T 14480–93, GB/T 7735—98

GB/T 5248–98, GB/T 5126—2001

GB/T 12969.2, GB/T 11260–96

  • Japan: JISH 0502
  • S.A: ASTM-E 243–97
  • Germany: DIN 54141

Applications

  • Online nondestructive testing on copper tube, steel pipe, stainless steel pipe, welded pipe, aluminum-plastic pipe, steel wire, bimetallic tube, optical cable, alclad steel wire, aluminum wire and metal bar production-line
  • Nondestructive testing on oil casing, sucker rod, hollow shaft, etc.
  • Nondestructive testing on condenser tube, air conditioner pipe, automobile oil pipe, etc.
  • Nondestructive testing on various kinds of metal pipe, bar, wire, etc.
Categories
Eddy Current Flaw Detector

WT-182A Eddy Current Flaw Detector

Main Technical Parameters

  1. Adapting industrial control cabinet, suitable for production line and other harsh environments. And with control panel for production line controlment.
  2. Frequency range: 100Hz-2MHz set as need, suitable for any metallic material.
  3. Magnification: 0-70db, step for 0.1db.
  4. Phase: 0°- 360°, step for 1°
  5. Two independent optional frequency.
  6. Automatic phase, amplitude analysis.
  7. Automatic zero system: Zero intervals can be set.
  8. Three different style of alarm area, and can be applied to any modes.
  9. Cut start and end signal function.
  10. Auto-screen/tracking impedance showed, and can be set interval or cancel.
  11. Automatic delay alarm system, and delay time can be set.
  12. Automatic delay marking system, and delay time can be set.
  13. Replay testing signal and two-way access, can automatic save this in hard disk, and you can burn a disc for permanent preservation.
  14. Perfect documents process function, and customized production of standard parameters.
  15. Automatic high-speed analog/digital electronic equilibrium.
  16. Allocate every probe: Out-through probe, rotational-scan probe, etc.
  17. Suitable for online quality testing of metal pipe and bar manufacturers.

System applicable standards:

  • China: GB/T 14480–93, GB/T 7735—98

GB/T 5248–98, GB/T 5126—2001

GB/T 12969.2, GB/T 11260–96

  • Japan: JISH 0502
  • S.A: ASTM-E 243–97
  • Germany: DIN 54141

Applications

  • Online nondestructive testing on copper tube, steel pipe, stainless steel pipe, welded pipe, aluminum-plastic pipe, steel wire, bimetallic tube, optical cable, alclad steel wire, aluminum wire and metal bar production-line
  • Nondestructive testing on oil casing, sucker rod, hollow shaft, etc.
  • Nondestructive testing on condenser tube, air conditioner pipe, automobile oil pipe, etc.
  • Nondestructive testing on various kinds of metal pipe, bar, wire, etc.
Categories
Hardness Sorting Machine

WT-636H Hardness Sorting Machine

An automatic eddy current machine which suitable for hardness sorting of small parts. Especially for 100% detection of standard parts.

Main features:

  1. 15-inch LCD touch screen.
  2. Two separated channels.
  3. Sensitivity: ±2HRC.
  4. Speed: 1.5 sec/piece (two channels).
  5. Automatic load, select, count and unload.
  6. No damage after detection.
  7. Statistics total number, qualified number, qualified rate, etc.
Categories
Hardness Sorting Machine

WT-638H hardness Sorting Machine

An automatic eddy current machine which suitable for hardness sorting of small and thin parts. Especially for 100% detection of standard parts.

Main features:

  1. Suitable for: small and thin parts (bearing rings).
  2. 15-inch LCD touch screen.
  3. Two separated channels.
  4. Frequency range: 100Hz-2MHz.
  5. Parts size: customize.
  6. Sensitivity: ±1HRC.
  7. Automatic load, select, count and unload.
  8. Speed: 1 pieces/sec (two channels).
  9. Sampling speed: 4 × 25000/sec.
  10. Gain: 12-70dB.
  11. Phase: 0 – 360°.
  12. Statistics total number, qualified number, qualified rate, etc.
  13. Industrial computer.
  14. No damage after detection.
  15. Power: ~220V ± 10%， ≤600W.
  16. Dimension: 900mm×650mm×1000mm.
Categories
Hardness Sorting Machine

WT-662 H Hardness Sorting Machine

Main features:

  1. Hardness sorting of short metal bars
  2. Two separate channels.
  3. Frequency range: 100Hz-2MHz.
  4. Sensitivity:±1HRC
  5. Automatic loading, selecting, counting and unloading.
  6. Speed: 1 sec/piece (two channels).
  7. Sampling speed: 4×25000/s.
  8. Gain: 12-70db.
  9. Phase: 0°- 360°.
  10. Using industrial computer
  11. No damage after detection.
  12. Power: ≤400W(220V).
  13. Size: 1000mm×650mm×1600mm.
Categories
Eddy Current Flaw Detector

WT-842 Cylinder Sleeve Eddy Current Flaw Detector

WT-842 Cylinder Sleeve Eddy Current Flaw Detector can test the ID, OD, sealing groove and end groove of cylinder sleeve at one time.

Main features:

  1. Work with four-channel.
  2. Detecting area: ID, OD, seal groove and terminal face trench.
  3. Speed: 15-30 secs/piece.
  4. Detection sensitivity: ≥0.1mm depth cracks.
  5. Equipment noise: ≤60 db. Power: ≤500 W (220V).
  6. Frequency range: 100Hz-1MHz.
  7. Magnification: 0-70db.
  8. Phase: 0°- 360°.
  9. Automatic loading, selecting and counting.
  10. No damages after detection.
  11. Detect without demagnetization.
  12. Statistics total number, qualified number, qualified rate, etc.